M540 × 6 Metric Thread Dimensions
Nominal diameter 540 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 536.103 mm. Basic minor diameter: 533.505 mm. Basic major diameter: 540 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 540 | Not specified |
| Pitch | 536.103 | 536.383 |
| Minor | 533.505 | 534.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 540.08 | Not specified |
| Pitch | 536.183 | 536.538 |
| Minor | 533.585 | 534.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 540 | Not specified |
| Pitch | 536.103 | 536.458 |
| Minor | 533.505 | 534.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 540.08 | Not specified |
| Pitch | 536.183 | 536.633 |
| Minor | 533.585 | 534.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 540 | Not specified |
| Pitch | 536.103 | 536.553 |
| Minor | 533.505 | 534.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 540.08 | Not specified |
| Pitch | 536.183 | 536.743 |
| Minor | 533.585 | 534.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 540 | Not specified |
| Pitch | 536.103 | 536.663 |
| Minor | 533.505 | 534.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 540.08 | Not specified |
| Pitch | 536.183 | 536.893 |
| Minor | 533.585 | 534.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 540 | Not specified |
| Pitch | 536.103 | 536.813 |
| Minor | 533.505 | 534.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 539.32 | 539.92 |
| Pitch | 535.688 | 536.023 |
| Root d3 | 531.992 | 532.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 539.32 | 539.92 |
| Pitch | 535.811 | 536.023 |
| Root d3 | 532.115 | 532.559 |
Cutting tap preparation
Pre-drill recommendation: 534 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 537.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.