M530 × 6 Metric Thread Dimensions
Nominal diameter 530 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 526.103 mm. Basic minor diameter: 523.505 mm. Basic major diameter: 530 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 530 | Not specified |
| Pitch | 526.103 | 526.383 |
| Minor | 523.505 | 524.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 530.08 | Not specified |
| Pitch | 526.183 | 526.538 |
| Minor | 523.585 | 524.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 530 | Not specified |
| Pitch | 526.103 | 526.458 |
| Minor | 523.505 | 524.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 530.08 | Not specified |
| Pitch | 526.183 | 526.633 |
| Minor | 523.585 | 524.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 530 | Not specified |
| Pitch | 526.103 | 526.553 |
| Minor | 523.505 | 524.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 530.08 | Not specified |
| Pitch | 526.183 | 526.743 |
| Minor | 523.585 | 524.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 530 | Not specified |
| Pitch | 526.103 | 526.663 |
| Minor | 523.505 | 524.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 530.08 | Not specified |
| Pitch | 526.183 | 526.893 |
| Minor | 523.585 | 524.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 530 | Not specified |
| Pitch | 526.103 | 526.813 |
| Minor | 523.505 | 524.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 529.32 | 529.92 |
| Pitch | 525.688 | 526.023 |
| Root d3 | 521.992 | 522.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 529.32 | 529.92 |
| Pitch | 525.811 | 526.023 |
| Root d3 | 522.115 | 522.559 |
Cutting tap preparation
Pre-drill recommendation: 524 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 527.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.