M520 × 6 Metric Thread Dimensions
Nominal diameter 520 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 516.103 mm. Basic minor diameter: 513.505 mm. Basic major diameter: 520 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 520 | Not specified |
| Pitch | 516.103 | 516.383 |
| Minor | 513.505 | 514.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 520.08 | Not specified |
| Pitch | 516.183 | 516.538 |
| Minor | 513.585 | 514.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 520 | Not specified |
| Pitch | 516.103 | 516.458 |
| Minor | 513.505 | 514.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 520.08 | Not specified |
| Pitch | 516.183 | 516.633 |
| Minor | 513.585 | 514.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 520 | Not specified |
| Pitch | 516.103 | 516.553 |
| Minor | 513.505 | 514.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 520.08 | Not specified |
| Pitch | 516.183 | 516.743 |
| Minor | 513.585 | 514.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 520 | Not specified |
| Pitch | 516.103 | 516.663 |
| Minor | 513.505 | 514.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 520.08 | Not specified |
| Pitch | 516.183 | 516.893 |
| Minor | 513.585 | 514.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 520 | Not specified |
| Pitch | 516.103 | 516.813 |
| Minor | 513.505 | 514.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 519.32 | 519.92 |
| Pitch | 515.688 | 516.023 |
| Root d3 | 511.992 | 512.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 519.32 | 519.92 |
| Pitch | 515.811 | 516.023 |
| Root d3 | 512.115 | 512.559 |
Cutting tap preparation
Pre-drill recommendation: 514 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 517.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.