M510 × 6 Metric Thread Dimensions
Nominal diameter 510 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 506.103 mm. Basic minor diameter: 503.505 mm. Basic major diameter: 510 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 510 | Not specified |
| Pitch | 506.103 | 506.383 |
| Minor | 503.505 | 504.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 510.08 | Not specified |
| Pitch | 506.183 | 506.538 |
| Minor | 503.585 | 504.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 510 | Not specified |
| Pitch | 506.103 | 506.458 |
| Minor | 503.505 | 504.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 510.08 | Not specified |
| Pitch | 506.183 | 506.633 |
| Minor | 503.585 | 504.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 510 | Not specified |
| Pitch | 506.103 | 506.553 |
| Minor | 503.505 | 504.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 510.08 | Not specified |
| Pitch | 506.183 | 506.743 |
| Minor | 503.585 | 504.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 510 | Not specified |
| Pitch | 506.103 | 506.663 |
| Minor | 503.505 | 504.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 510.08 | Not specified |
| Pitch | 506.183 | 506.893 |
| Minor | 503.585 | 504.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 510 | Not specified |
| Pitch | 506.103 | 506.813 |
| Minor | 503.505 | 504.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 509.32 | 509.92 |
| Pitch | 505.688 | 506.023 |
| Root d3 | 501.992 | 502.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 509.32 | 509.92 |
| Pitch | 505.811 | 506.023 |
| Root d3 | 502.115 | 502.559 |
Cutting tap preparation
Pre-drill recommendation: 504 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 507.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.