M500 × 6 Metric Thread Dimensions
Nominal diameter 500 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 496.103 mm. Basic minor diameter: 493.505 mm. Basic major diameter: 500 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 500 | Not specified |
| Pitch | 496.103 | 496.383 |
| Minor | 493.505 | 494.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 500.08 | Not specified |
| Pitch | 496.183 | 496.538 |
| Minor | 493.585 | 494.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 500 | Not specified |
| Pitch | 496.103 | 496.458 |
| Minor | 493.505 | 494.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 500.08 | Not specified |
| Pitch | 496.183 | 496.633 |
| Minor | 493.585 | 494.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 500 | Not specified |
| Pitch | 496.103 | 496.553 |
| Minor | 493.505 | 494.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 500.08 | Not specified |
| Pitch | 496.183 | 496.743 |
| Minor | 493.585 | 494.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 500 | Not specified |
| Pitch | 496.103 | 496.663 |
| Minor | 493.505 | 494.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 500.08 | Not specified |
| Pitch | 496.183 | 496.893 |
| Minor | 493.585 | 494.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 500 | Not specified |
| Pitch | 496.103 | 496.813 |
| Minor | 493.505 | 494.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 499.32 | 499.92 |
| Pitch | 495.688 | 496.023 |
| Root d3 | 491.992 | 492.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 499.32 | 499.92 |
| Pitch | 495.811 | 496.023 |
| Root d3 | 492.115 | 492.559 |
Cutting tap preparation
Pre-drill recommendation: 494 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 497.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.