M490 × 6 Metric Thread Dimensions
Nominal diameter 490 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 486.103 mm. Basic minor diameter: 483.505 mm. Basic major diameter: 490 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 490 | Not specified |
| Pitch | 486.103 | 486.383 |
| Minor | 483.505 | 484.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 490.08 | Not specified |
| Pitch | 486.183 | 486.538 |
| Minor | 483.585 | 484.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 490 | Not specified |
| Pitch | 486.103 | 486.458 |
| Minor | 483.505 | 484.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 490.08 | Not specified |
| Pitch | 486.183 | 486.633 |
| Minor | 483.585 | 484.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 490 | Not specified |
| Pitch | 486.103 | 486.553 |
| Minor | 483.505 | 484.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 490.08 | Not specified |
| Pitch | 486.183 | 486.743 |
| Minor | 483.585 | 484.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 490 | Not specified |
| Pitch | 486.103 | 486.663 |
| Minor | 483.505 | 484.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 490.08 | Not specified |
| Pitch | 486.183 | 486.893 |
| Minor | 483.585 | 484.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 490 | Not specified |
| Pitch | 486.103 | 486.813 |
| Minor | 483.505 | 484.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 489.32 | 489.92 |
| Pitch | 485.688 | 486.023 |
| Root d3 | 481.992 | 482.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 489.32 | 489.92 |
| Pitch | 485.811 | 486.023 |
| Root d3 | 482.115 | 482.559 |
Cutting tap preparation
Pre-drill recommendation: 484 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 487.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.