M480 × 6 Metric Thread Dimensions
Nominal diameter 480 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 476.103 mm. Basic minor diameter: 473.505 mm. Basic major diameter: 480 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 480 | Not specified |
| Pitch | 476.103 | 476.383 |
| Minor | 473.505 | 474.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 480.08 | Not specified |
| Pitch | 476.183 | 476.538 |
| Minor | 473.585 | 474.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 480 | Not specified |
| Pitch | 476.103 | 476.458 |
| Minor | 473.505 | 474.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 480.08 | Not specified |
| Pitch | 476.183 | 476.633 |
| Minor | 473.585 | 474.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 480 | Not specified |
| Pitch | 476.103 | 476.553 |
| Minor | 473.505 | 474.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 480.08 | Not specified |
| Pitch | 476.183 | 476.743 |
| Minor | 473.585 | 474.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 480 | Not specified |
| Pitch | 476.103 | 476.663 |
| Minor | 473.505 | 474.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 480.08 | Not specified |
| Pitch | 476.183 | 476.893 |
| Minor | 473.585 | 474.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 480 | Not specified |
| Pitch | 476.103 | 476.813 |
| Minor | 473.505 | 474.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 479.32 | 479.92 |
| Pitch | 475.688 | 476.023 |
| Root d3 | 471.992 | 472.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 479.32 | 479.92 |
| Pitch | 475.811 | 476.023 |
| Root d3 | 472.115 | 472.559 |
Cutting tap preparation
Pre-drill recommendation: 474 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 477.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.