M470 × 6 Metric Thread Dimensions
Nominal diameter 470 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 466.103 mm. Basic minor diameter: 463.505 mm. Basic major diameter: 470 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 470 | Not specified |
| Pitch | 466.103 | 466.383 |
| Minor | 463.505 | 464.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 470.08 | Not specified |
| Pitch | 466.183 | 466.538 |
| Minor | 463.585 | 464.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 470 | Not specified |
| Pitch | 466.103 | 466.458 |
| Minor | 463.505 | 464.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 470.08 | Not specified |
| Pitch | 466.183 | 466.633 |
| Minor | 463.585 | 464.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 470 | Not specified |
| Pitch | 466.103 | 466.553 |
| Minor | 463.505 | 464.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 470.08 | Not specified |
| Pitch | 466.183 | 466.743 |
| Minor | 463.585 | 464.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 470 | Not specified |
| Pitch | 466.103 | 466.663 |
| Minor | 463.505 | 464.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 470.08 | Not specified |
| Pitch | 466.183 | 466.893 |
| Minor | 463.585 | 464.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 470 | Not specified |
| Pitch | 466.103 | 466.813 |
| Minor | 463.505 | 464.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 469.32 | 469.92 |
| Pitch | 465.688 | 466.023 |
| Root d3 | 461.992 | 462.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 469.32 | 469.92 |
| Pitch | 465.811 | 466.023 |
| Root d3 | 462.115 | 462.559 |
Cutting tap preparation
Pre-drill recommendation: 464 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 467.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.