M460 × 6 Metric Thread Dimensions
Nominal diameter 460 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 456.103 mm. Basic minor diameter: 453.505 mm. Basic major diameter: 460 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 460 | Not specified |
| Pitch | 456.103 | 456.383 |
| Minor | 453.505 | 454.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 460.08 | Not specified |
| Pitch | 456.183 | 456.538 |
| Minor | 453.585 | 454.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 460 | Not specified |
| Pitch | 456.103 | 456.458 |
| Minor | 453.505 | 454.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 460.08 | Not specified |
| Pitch | 456.183 | 456.633 |
| Minor | 453.585 | 454.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 460 | Not specified |
| Pitch | 456.103 | 456.553 |
| Minor | 453.505 | 454.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 460.08 | Not specified |
| Pitch | 456.183 | 456.743 |
| Minor | 453.585 | 454.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 460 | Not specified |
| Pitch | 456.103 | 456.663 |
| Minor | 453.505 | 454.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 460.08 | Not specified |
| Pitch | 456.183 | 456.893 |
| Minor | 453.585 | 454.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 460 | Not specified |
| Pitch | 456.103 | 456.813 |
| Minor | 453.505 | 454.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 459.32 | 459.92 |
| Pitch | 455.688 | 456.023 |
| Root d3 | 451.992 | 452.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 459.32 | 459.92 |
| Pitch | 455.811 | 456.023 |
| Root d3 | 452.115 | 452.559 |
Cutting tap preparation
Pre-drill recommendation: 454 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 457.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.