M450 × 6 Metric Thread Dimensions
Nominal diameter 450 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 446.103 mm. Basic minor diameter: 443.505 mm. Basic major diameter: 450 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 450 | Not specified |
| Pitch | 446.103 | 446.383 |
| Minor | 443.505 | 444.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 450.08 | Not specified |
| Pitch | 446.183 | 446.538 |
| Minor | 443.585 | 444.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 450 | Not specified |
| Pitch | 446.103 | 446.458 |
| Minor | 443.505 | 444.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 450.08 | Not specified |
| Pitch | 446.183 | 446.633 |
| Minor | 443.585 | 444.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 450 | Not specified |
| Pitch | 446.103 | 446.553 |
| Minor | 443.505 | 444.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 450.08 | Not specified |
| Pitch | 446.183 | 446.743 |
| Minor | 443.585 | 444.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 450 | Not specified |
| Pitch | 446.103 | 446.663 |
| Minor | 443.505 | 444.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 450.08 | Not specified |
| Pitch | 446.183 | 446.893 |
| Minor | 443.585 | 444.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 450 | Not specified |
| Pitch | 446.103 | 446.813 |
| Minor | 443.505 | 444.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 449.32 | 449.92 |
| Pitch | 445.688 | 446.023 |
| Root d3 | 441.992 | 442.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 449.32 | 449.92 |
| Pitch | 445.811 | 446.023 |
| Root d3 | 442.115 | 442.559 |
Cutting tap preparation
Pre-drill recommendation: 444 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 447.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.