M440 × 6 Metric Thread Dimensions
Nominal diameter 440 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 436.103 mm. Basic minor diameter: 433.505 mm. Basic major diameter: 440 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 440 | Not specified |
| Pitch | 436.103 | 436.383 |
| Minor | 433.505 | 434.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 440.08 | Not specified |
| Pitch | 436.183 | 436.538 |
| Minor | 433.585 | 434.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 440 | Not specified |
| Pitch | 436.103 | 436.458 |
| Minor | 433.505 | 434.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 440.08 | Not specified |
| Pitch | 436.183 | 436.633 |
| Minor | 433.585 | 434.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 440 | Not specified |
| Pitch | 436.103 | 436.553 |
| Minor | 433.505 | 434.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 440.08 | Not specified |
| Pitch | 436.183 | 436.743 |
| Minor | 433.585 | 434.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 440 | Not specified |
| Pitch | 436.103 | 436.663 |
| Minor | 433.505 | 434.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 440.08 | Not specified |
| Pitch | 436.183 | 436.893 |
| Minor | 433.585 | 434.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 440 | Not specified |
| Pitch | 436.103 | 436.813 |
| Minor | 433.505 | 434.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 439.32 | 439.92 |
| Pitch | 435.688 | 436.023 |
| Root d3 | 431.992 | 432.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 439.32 | 439.92 |
| Pitch | 435.811 | 436.023 |
| Root d3 | 432.115 | 432.559 |
Cutting tap preparation
Pre-drill recommendation: 434 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 437.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.