M420 × 6 Metric Thread Dimensions
Nominal diameter 420 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 416.103 mm. Basic minor diameter: 413.505 mm. Basic major diameter: 420 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 420 | Not specified |
| Pitch | 416.103 | 416.383 |
| Minor | 413.505 | 414.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 420.08 | Not specified |
| Pitch | 416.183 | 416.538 |
| Minor | 413.585 | 414.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 420 | Not specified |
| Pitch | 416.103 | 416.458 |
| Minor | 413.505 | 414.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 420.08 | Not specified |
| Pitch | 416.183 | 416.633 |
| Minor | 413.585 | 414.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 420 | Not specified |
| Pitch | 416.103 | 416.553 |
| Minor | 413.505 | 414.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 420.08 | Not specified |
| Pitch | 416.183 | 416.743 |
| Minor | 413.585 | 414.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 420 | Not specified |
| Pitch | 416.103 | 416.663 |
| Minor | 413.505 | 414.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 420.08 | Not specified |
| Pitch | 416.183 | 416.893 |
| Minor | 413.585 | 414.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 420 | Not specified |
| Pitch | 416.103 | 416.813 |
| Minor | 413.505 | 414.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 419.32 | 419.92 |
| Pitch | 415.688 | 416.023 |
| Root d3 | 411.992 | 412.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 419.32 | 419.92 |
| Pitch | 415.811 | 416.023 |
| Root d3 | 412.115 | 412.559 |
Cutting tap preparation
Pre-drill recommendation: 414 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 417.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.