M410 × 6 Metric Thread Dimensions
Nominal diameter 410 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 406.103 mm. Basic minor diameter: 403.505 mm. Basic major diameter: 410 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 410 | Not specified |
| Pitch | 406.103 | 406.383 |
| Minor | 403.505 | 404.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 410.08 | Not specified |
| Pitch | 406.183 | 406.538 |
| Minor | 403.585 | 404.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 410 | Not specified |
| Pitch | 406.103 | 406.458 |
| Minor | 403.505 | 404.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 410.08 | Not specified |
| Pitch | 406.183 | 406.633 |
| Minor | 403.585 | 404.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 410 | Not specified |
| Pitch | 406.103 | 406.553 |
| Minor | 403.505 | 404.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 410.08 | Not specified |
| Pitch | 406.183 | 406.743 |
| Minor | 403.585 | 404.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 410 | Not specified |
| Pitch | 406.103 | 406.663 |
| Minor | 403.505 | 404.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 410.08 | Not specified |
| Pitch | 406.183 | 406.893 |
| Minor | 403.585 | 404.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 410 | Not specified |
| Pitch | 406.103 | 406.813 |
| Minor | 403.505 | 404.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 409.32 | 409.92 |
| Pitch | 405.688 | 406.023 |
| Root d3 | 401.992 | 402.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 409.32 | 409.92 |
| Pitch | 405.811 | 406.023 |
| Root d3 | 402.115 | 402.559 |
Cutting tap preparation
Pre-drill recommendation: 404 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 407.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.