M28 × 2 Metric Thread Dimensions
Nominal diameter 28 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 26.701 mm. Basic minor diameter: 25.835 mm. Basic major diameter: 28 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 28 | Not specified |
| Pitch | 26.701 | 26.841 |
| Minor | 25.835 | 26.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 28.038 | Not specified |
| Pitch | 26.739 | 26.919 |
| Minor | 25.873 | 26.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 28 | Not specified |
| Pitch | 26.701 | 26.881 |
| Minor | 25.835 | 26.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 28.038 | Not specified |
| Pitch | 26.739 | 26.963 |
| Minor | 25.873 | 26.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 28 | Not specified |
| Pitch | 26.701 | 26.925 |
| Minor | 25.835 | 26.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 28.038 | Not specified |
| Pitch | 26.739 | 27.019 |
| Minor | 25.873 | 26.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 28 | Not specified |
| Pitch | 26.701 | 26.981 |
| Minor | 25.835 | 26.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 28.038 | Not specified |
| Pitch | 26.739 | 27.094 |
| Minor | 25.873 | 26.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 28 | Not specified |
| Pitch | 26.701 | 27.056 |
| Minor | 25.835 | 26.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.682 | 27.962 |
| Pitch | 26.493 | 26.663 |
| Root d3 | 25.261 | 25.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 27.682 | 27.962 |
| Pitch | 26.557 | 26.663 |
| Root d3 | 25.325 | 25.508 |
Cutting tap preparation
Pre-drill recommendation: 26 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 27.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.