M255 × 3 Metric Thread Dimensions
Nominal diameter 255 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 253.051 mm. Basic minor diameter: 251.752 mm. Basic major diameter: 255 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 255 | Not specified |
| Pitch | 253.051 | 253.263 |
| Minor | 251.752 | 252.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 255.048 | Not specified |
| Pitch | 253.099 | 253.364 |
| Minor | 251.8 | 252.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 255 | Not specified |
| Pitch | 253.051 | 253.316 |
| Minor | 251.752 | 252.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 255.048 | Not specified |
| Pitch | 253.099 | 253.434 |
| Minor | 251.8 | 252.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 255 | Not specified |
| Pitch | 253.051 | 253.386 |
| Minor | 251.752 | 252.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 255.048 | Not specified |
| Pitch | 253.099 | 253.524 |
| Minor | 251.8 | 252.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 255 | Not specified |
| Pitch | 253.051 | 253.476 |
| Minor | 251.752 | 252.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 255.048 | Not specified |
| Pitch | 253.099 | 253.629 |
| Minor | 251.8 | 252.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 255 | Not specified |
| Pitch | 253.051 | 253.581 |
| Minor | 251.752 | 252.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 254.577 | 254.952 |
| Pitch | 252.753 | 253.003 |
| Root d3 | 250.905 | 251.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 254.577 | 254.952 |
| Pitch | 252.843 | 253.003 |
| Root d3 | 250.995 | 251.271 |
Cutting tap preparation
Pre-drill recommendation: 252 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 253.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.