M2.6 × 0.45 Metric Thread Dimensions
Nominal diameter 2.6 mm; pitch 0.45 mm.
Basic geometry
Basic pitch diameter: 2.308 mm. Basic minor diameter: 2.113 mm. Basic major diameter: 2.6 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.6 | Not specified |
| Pitch | 2.308 | 2.368 |
| Minor | 2.113 | 2.193 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.62 | Not specified |
| Pitch | 2.328 | 2.403 |
| Minor | 2.133 | 2.233 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.6 | Not specified |
| Pitch | 2.308 | 2.383 |
| Minor | 2.113 | 2.213 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.62 | Not specified |
| Pitch | 2.328 | 2.423 |
| Minor | 2.133 | 2.258 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.6 | Not specified |
| Pitch | 2.308 | 2.403 |
| Minor | 2.113 | 2.238 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.48 | 2.58 |
| Pitch | 2.217 | 2.288 |
| Root d3 | 1.94 | 2.028 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.48 | 2.58 |
| Pitch | 2.243 | 2.288 |
| Root d3 | 1.966 | 2.028 |
Cutting tap preparation
Pre-drill recommendation: 2.15 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 2.4 mm. Approximate formation model. Estimated formation: 65.4%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.