M2.2 × 0.45 Metric Thread Dimensions
Nominal diameter 2.2 mm; pitch 0.45 mm.
Basic geometry
Basic pitch diameter: 1.908 mm. Basic minor diameter: 1.713 mm. Basic major diameter: 2.2 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.2 | Not specified |
| Pitch | 1.908 | 1.968 |
| Minor | 1.713 | 1.793 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.22 | Not specified |
| Pitch | 1.928 | 2.003 |
| Minor | 1.733 | 1.833 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.2 | Not specified |
| Pitch | 1.908 | 1.983 |
| Minor | 1.713 | 1.813 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.22 | Not specified |
| Pitch | 1.928 | 2.023 |
| Minor | 1.733 | 1.858 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.2 | Not specified |
| Pitch | 1.908 | 2.003 |
| Minor | 1.713 | 1.838 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.08 | 2.18 |
| Pitch | 1.817 | 1.888 |
| Root d3 | 1.54 | 1.628 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.08 | 2.18 |
| Pitch | 1.843 | 1.888 |
| Root d3 | 1.566 | 1.628 |
Cutting tap preparation
Pre-drill recommendation: 1.75 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 2 mm. Approximate formation model. Estimated formation: 65.4%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.