M1.8 × 0.35 Metric Thread Dimensions
Nominal diameter 1.8 mm; pitch 0.35 mm.
Basic geometry
Basic pitch diameter: 1.573 mm. Basic minor diameter: 1.421 mm. Basic major diameter: 1.8 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.8 | Not specified |
| Pitch | 1.573 | 1.626 |
| Minor | 1.421 | 1.484 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.819 | Not specified |
| Pitch | 1.592 | 1.659 |
| Minor | 1.44 | 1.52 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.8 | Not specified |
| Pitch | 1.573 | 1.64 |
| Minor | 1.421 | 1.501 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.819 | Not specified |
| Pitch | 1.592 | 1.677 |
| Minor | 1.44 | 1.54 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.8 | Not specified |
| Pitch | 1.573 | 1.658 |
| Minor | 1.421 | 1.521 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.696 | 1.781 |
| Pitch | 1.491 | 1.554 |
| Root d3 | 1.275 | 1.352 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.696 | 1.781 |
| Pitch | 1.514 | 1.554 |
| Root d3 | 1.298 | 1.352 |
Cutting tap preparation
Pre-drill recommendation: 1.45 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 1.65 mm. Approximate formation model. Estimated formation: 63.0%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.