M1.7 × 0.35 Metric Thread Dimensions
Nominal diameter 1.7 mm; pitch 0.35 mm.
Basic geometry
Basic pitch diameter: 1.473 mm. Basic minor diameter: 1.321 mm. Basic major diameter: 1.7 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.7 | Not specified |
| Pitch | 1.473 | 1.526 |
| Minor | 1.321 | 1.384 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.719 | Not specified |
| Pitch | 1.492 | 1.559 |
| Minor | 1.34 | 1.42 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.7 | Not specified |
| Pitch | 1.473 | 1.54 |
| Minor | 1.321 | 1.401 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.719 | Not specified |
| Pitch | 1.492 | 1.577 |
| Minor | 1.34 | 1.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.7 | Not specified |
| Pitch | 1.473 | 1.558 |
| Minor | 1.321 | 1.421 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.596 | 1.681 |
| Pitch | 1.391 | 1.454 |
| Root d3 | 1.175 | 1.252 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.596 | 1.681 |
| Pitch | 1.414 | 1.454 |
| Root d3 | 1.198 | 1.252 |
Cutting tap preparation
Pre-drill recommendation: 1.35 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 1.55 mm. Approximate formation model. Estimated formation: 63.0%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.