M1.4 × 0.3 Metric Thread Dimensions
Nominal diameter 1.4 mm; pitch 0.3 mm.
Basic geometry
Basic pitch diameter: 1.205 mm. Basic minor diameter: 1.075 mm. Basic major diameter: 1.4 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.4 | Not specified |
| Pitch | 1.205 | 1.253 |
| Minor | 1.075 | 1.128 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.418 | Not specified |
| Pitch | 1.223 | 1.283 |
| Minor | 1.093 | 1.16 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.4 | Not specified |
| Pitch | 1.205 | 1.265 |
| Minor | 1.075 | 1.142 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.418 | Not specified |
| Pitch | 1.223 | 1.298 |
| Minor | 1.093 | 1.178 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.4 | Not specified |
| Pitch | 1.205 | 1.28 |
| Minor | 1.075 | 1.16 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.307 | 1.382 |
| Pitch | 1.131 | 1.187 |
| Root d3 | 0.946 | 1.014 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 1.307 | 1.382 |
| Pitch | 1.151 | 1.187 |
| Root d3 | 0.966 | 1.014 |
Cutting tap preparation
Pre-drill recommendation: 1.1 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 1.27 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.