BÖHLER M303 HIGH HARD
- Hardness
- 40 HRC
- Thermal Conductivity
- 23 W/(m·K)
- Elongation
- 10 %
- Chemical Composition
- C: 0.27%, Cr: 14.5%, Mo: 1%, Ni: 0.85%, Mn: 0.65%, Si: 0.3%
Material Description
BÖHLER M303 EXTRA is a corrosion-resistant martensitic tool steel normally supplied in the quenched and tempered (pre-hardened) condition, typically around 32 HRC. Its machining behaviour is similar to EN 1.2316 and is strongly influenced by its relatively high strength. It is generally best machined like a conventional steel of similar strength, but with somewhat lower cutting speeds due to its low thermal conductivity. Universal carbide tools and geometries suitable for medium- to high-strength steels are recommended. Sharp stainless-steel geometries can also perform well, while stronger cutting edges designed for pre-hardened steels may provide better tool life and stability.